Most blocked outside drains and gullies fill up with leaves, silt, grease, food waste or soap, and you can often clear the top of the gully yourself by lifting the grate and scooping out the debris. If water still won’t drain, or the nearest inspection chamber is also full, the blockage sits further along the underground pipe, and a drainage engineer will need to jet it clear. A gully that blocks again and again usually has a structural fault behind it.
A blocked gully overflows across paths and patios, smells and can let wastewater soak into the ground beside your walls. Catching it early keeps a simple clearance from turning into a repair. This guide explains how gullies work, what blocks them, what you can safely check yourself and when to call an engineer.
Outside Gullies vs Underground Drains: What’s the Difference?
A gully is the drain you can see outside, usually a square or round grate at the foot of a downpipe or beneath the kitchen and bathroom waste pipes. Below the grate sits a pot with a U-shaped trap that holds water, which stops sewer smells coming back up.
The gully connects to an underground drain, which runs to inspection chambers (manholes) and on to the public sewer or, for some rainwater, a soakaway. When a gully overflows, the blockage can sit in the gully itself, in the short pipe below it, or further down the underground system.
A quick look tells you which. If water stands in the gully but the nearest inspection chamber runs clear, the problem lies in the gully pot. If the gully stays full even after you’ve emptied the pot, and the chamber is clear or dry, the blockage sits in the short pipe between them. When the gully and the chamber both fill, and other fittings start to slow down, the blockage sits in the underground drain. And if your neighbours have the same problem, look to the shared sewer.
Road gullies at the kerb belong to the highway authority, so report those to your local council rather than clearing them yourself.
What Causes Outside Drains and Gullies to Block?
Rainwater gullies mostly block with whatever the weather brings. Autumn leaves, moss from the roof and grass cuttings wash in and settle in the pot, while heavy rain carries soil from flowerbeds, grit from paths and debris from building work. The silt settles in the trap and gradually fills it.
Kitchen gullies have a different problem. They take water from the sink, dishwasher and washing machine, and fat cools and sets in the cold gully, binding food scraps and soap into a solid mass. In Southampton, a customer noticed water backing up around the kitchen gully, which held dirty water and waste because the pipework had stopped draining.
Litter adds to the problem where a grate is missing or broken: cigarette ends, plastic, cloths and building materials all end up in the pot. And sometimes the gully is fine and the blockage sits further down the drain. In Swindon, water collected around a rainwater gully at the foot of a downpipe, but the obstruction extended into the wider underground system. Our engineer traced it and cleared it with high-pressure jetting, with no need for a new gully or pipe.
Safe Checks Homeowners Can Carry Out
Wear thick rubber gloves and eye protection, and keep children and pets away. Then work through these steps:
- Lift the grate. Prise it up with a flat tool and rinse it.
- Scoop out debris. Use a small trowel or an old cup to remove leaves, silt and fat from the pot. Bag it and put it in the bin.
- Flush with a bucket of water. If the water drains away freely, you’ve cleared it.
- Check the nearest inspection chamber. Lift the cover and look inside. Note whether it’s dry, flowing or full.
- Replace the grate. A grate in good condition stops leaves and litter getting in.
Avoid caustic or acid drain cleaners, which react violently and can splash, and never put your head or arm into a deep chamber. Wash your hands well afterwards, because sewage carries bacteria. Our guide on whether you can clear a blocked drain yourself covers safe DIY methods in more detail.
Signs the Blockage Is Further Along the Drainage System
The clearest sign is a gully that refills as soon as you’ve emptied it. Lift the nearest inspection chamber cover: if that chamber is full of water too, the blockage sits in the underground drain beyond the reach of a scoop. Other fittings, such as the toilet or bath, draining slowly or gurgling point the same way, as does water backing up in more than one gully.
Smells and neighbours give further clues. A sewage smell around the house or garden suggests waste is sitting in the pipe, and if neighbours report the same problem, the blockage may lie in a shared sewer, which your water company should clear.
How Do Professionals Clear Blocked Gullies?
An engineer starts by finding where the blockage sits. They lift the gully and the chambers along the run, and may use a CCTV camera to look along the pipe.
Most gully blockages then come out with high-pressure jetting, which sends water through a specialist nozzle. Rear-facing jets pull the hose along while they scour grease, silt and scale off the pipe walls and flush the debris downstream. In Southampton, our engineer used high-pressure jetting to clear the gully and its pipework without excavation, then tested the gully to confirm water flowed away correctly.
Our guide to high-pressure drain jetting explains how the equipment works.
Jetting isn’t the only tool. For hard objects, the engineer may switch to drain rods or a mechanical cutter, and where silt or waste fills a gully or chamber, a vacuum tanker can suck it out completely. If the gully keeps blocking, the engineer runs a camera through the pipe to check for cracks, displaced joints, roots or a collapse. In Dorchester, our engineers inspected an external gully with several pipes discharging into it and surveyed the connected underground pipework with a CCTV camera.
Gully overflowing again? Call NOW Drainage on 0800 001 6568. We charge no call-out fee, day or night.
When Recurring Gully Blockages Indicate a Structural Problem
A gully that blocks every few weeks usually has a fault that clearing can’t fix. The pot itself may have cracked or collapsed, letting wastewater leak out and soil wash in. The short pipe between the gully and the first chamber may have broken or shifted, or roots may have entered at the connection. Sometimes the original installation is the problem: a poor connection or gradient leaves water and solids sitting in the pipe, or one gully takes more waste pipes than it can handle.
In Poole, a kitchen gully kept blocking after each clearance and damp appeared on the wall beside it. Our engineer found the gully had collapsed. The team excavated around it, removed it and installed a new PVC gully with a fresh grating and concrete surround. Our guide to collapsed drain pipes explains the warning signs.
How to Stop Your Outside Gully Blocking
A little routine maintenance keeps most gullies flowing. Fit a gully guard where trees overhang, clear the grate in autumn and after storms, and replace broken grates so litter and leaves can’t get in. Sweep paths rather than hosing grit into the gully.
For kitchen gullies, the fix starts indoors. Wipe pans before washing them, bin food scraps, use a sink strainer and fit a lint filter to the washing machine. Less fat and fibre going down the waste means less to set in the cold gully outside.
Frequently Asked Questions
How do I unblock an outside drain gully?
Wear gloves, lift the grate and scoop the leaves, silt and fat out of the gully pot, then flush it with a bucket of water. If it still won’t drain, or the nearest inspection chamber is full, call an engineer to jet the pipe.
Why is my outside drain full of water?
A gully always holds some water in its trap, which is normal. If the water reaches the grate or overflows, something is blocking the gully or the drain beyond it. Check the nearest chamber to see where the blockage sits.
Who is responsible for a blocked outside drain?
You usually own the gullies and pipes within your boundary that serve only your home. Water companies usually look after shared sewers and lateral drains, and councils look after road gullies. Our guide to who is responsible for a blocked drain explains the rules.
Can I use bleach or drain cleaner in an outside gully?
Avoid strong chemical drain cleaners. They react violently, can splash and rarely shift silt, leaves or set fat. Scooping out the debris and flushing with water works better and safer.
Why does my outside drain smell?
A dry or blocked trap, rotting food and leaves in the gully pot, or a cracked pipe can all cause smells. Our guide to why outside drains smell covers the causes and fixes.
In Short
You can clear many gully blockages with gloves, a scoop and a bucket of water. When the chamber is full too, or the gully keeps blocking, call an engineer to jet the drain and check it on camera.
We clear blocked outside drains and gullies across Dorset, Hampshire, Wiltshire, Bristol and Somerset, including Southampton, Swindon and Dorchester. Our blocked drains and drain and sewer clearance teams find the cause as well as clearing the blockage, and if the gully has failed, our drain repairs team can replace it.
Gully still full after you’ve scooped it out? That’s our cue. Ring 0800 001 6568 any time, day or night, or book online, and we’ll jet it clear.